HandyTone 286 and Asterisk: DTMF

Aus NOBAQ
Zur Navigation springenZur Suche springen
Die druckbare Version wird nicht mehr unterstützt und kann Darstellungsfehler aufweisen. Bitte aktualisiere deine Browser-Lesezeichen und verwende stattdessen die Standard-Druckfunktion des Browsers.
Handytone286.jpg

Last year, I bought me a Grandstream HandyTone 286 ATA to connect an ordinary phone through normal Ethernet with my Asterisk. I set up the box and sometimes a few things, e.g. DTMF did not work correctly. Today, I found the correct options for the device. Concerning DTMF you’ve the following choices in the setup page:

  • in-audio
  • via RTP
  • via SIP-Info

Till now, I’ve selected SIP-INFO, then RTP. But in this case, the HandyTone needs to decode the DTMF frequencies to transmit the number through SIP. With the first option set, HandyTone does not care about DTMF; it just routes the audiostream to my Asterisk. The Handytone does not decode DTMF tones very well, therefore I need to send them “in-audio” and let Asterisk decode them. I need to tell Asterisk to decode the DTMF in the autostream by setting

dtmfmode = inband
relaxdtmf = yes

in the sip.conf. This should work and will decode the DTMF tones successfully.


Kommentare

<comments />

Kelly Brown said ...

The best information i have found exactly here. Keep going Thank you

--Kelly Brown 08:07, 13. Jun. 2009 (MSD)